Celair Profile Series Instalační manuál stáhnout pdf (Strana 18)

Installation Instructions

4.0 Connections

Profile

4.4. Electrical

4.4.1. Wiring – Important Notes

• A LICENSED ELECTRICIAN must carry out 240-volt connection

wiring to the unit. It is the responsibility of the LICENSED

ELECTRICIAN that the unit is connected as per AS3000 (Wiring rules)

and any local regulations and statutory or legal requirements. A

compliance certificate is required for any new electrical connections.

• It is the recommendation of Climate Technologies that a dedicated

circuit be fitted from the distribution board with a separate circuit

breaker. This may be an electrical authority requirement in some

states, and is precautionary in other states for future additions where

an existing circuit is used.

• Do not use an extension cord to reach the GPO. This is illegal and

unsafe. An Electrician must relocate the GPO if the plug and cable

does not reach.

4.4.2. Wiring Connections

• Have a licensed Electrician install a dedicated circuit from the distribution

board with a separate circuit breaker and a 10 Amp GPO (general-

purpose outlet) within 600mm of the dropper duct.

Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Žádné komentáře

Celair Profile Series Instalační manuál Strana 18